Английская версия Русская версия
Phone/fax:
(8452) 242 242

Tank and metal framework producer


Tank and metal framework producer “RussianTnakWorks” is the up-to-date manufacturer of:

Coiling frame for vertical tanks’ production:

“RussianTnakWorks” is one of the few enterprises of the world that are equipped with the special coiling machine. This enables to produce coiled panels of the wall, bottom and roof of the tank with the use of automated double-welding.

The quality of rolled sheets, produced at the special facility, is sufficiently higher than that of the sheets, “rolled” on the floor by the hauling winches. Our enterprise guarantees the exact geometric parameters, lack of deformation and ideal welding joints.

See photo – our coiling frame in operation:

Tank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producer

Tank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producer

Welding of horizontal and drainage storage tanks

“RussianTankWorks” operates automatic and auto-manual Lincoln Electric welding equipment.

Assembling of the tank elements is carried out at the columned welding keys in automatic regime. This provides high quality of assembling operations, making the period of production shorter and decreasing the cost of manual work. Only few enterprises in Russia possess such kind of equipment, which makes our products competitive in quality.

Tank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producer

Tank and metal framework producerTank and metal framework producer

Metal preparation and component parts production

Tank production facility “RussianTankWorks” has sufficient material and technical possibilities for appropriate metal-roll preparation, which ensures high quality of all tank elements.

Since a tank is not just a set of walls and bottom, but also manway plates, fitting pipes, flanges, footpaths and other technological elements, the quality of the final unit is greatly dependent on the accuracy of each element’s production.

Our enterprise has fully equipped mechanical metal processing facility, highly-accurate scarfing machines, sheet-bending and sheet-flattening equipment, metal turning lathes and drilling machines.

There are 65 units of travel cranes, spider and tower cranes at our production site, each of those is used strictly in accordance with the purpose and lifting capacity, which eliminates possibility of deformation of the tank elements and industrial accidents.

Tank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producer

Corrosion preventive procedures

“RussianTankWorks” also has a bead blasting facility and a paint shop. This is to be seen as one more competitive advantage of our enterprise, as the majority of Russian producers fail to keep the corrosion preventive technology for the finished tanks.

After welding all metal units are meant to pass bead blasting processing, after which the coating is applied according to the project. The coated units are dried in special premises, where the temperature, humidity and dust content are strictly controlled. This ensures the long operating period for the tank and its aesthetic exterior view.

Tank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producerTank and metal framework producer

TECHNICAL EQUIPMENT DATA
Coiling frame for metal panels of the tank 1 unit
Travel, spider and tower cranes 65 units
Guillotine shares from 4 mm to 30 mm 20 units
Heavy vehicular traffic 30 units
Gas plasma cutting machines for metal roll sheets with the software support (Russia) 6 units
Shot-blasters of 3000 t/month production capacity (The Czech Republic) 4 units
Continuous production lines of assembling, welding and flattening of shrinkage distortion of beam sections 2 units
Sheet-bending machines for steel sheets of 3000 mm’ width and up to 30 mm’ thickness. (Turkey) 2 units
Profile- and tube-bending machine (Turkey) 1 units
Automatic and auto-manual welding equipment (Russia and Japan)  
Columned welding keys with the equipment for automatic flux welding 2 units
Drilling 3-spindle aggregate centers (Italy) 2 units
Scarfing machines (up to 40 mm) 6 units